Customization: | Available |
---|---|
Weight: | 1150kg |
Warranty: | 5years |
Still deciding? Get samples of US$ 999/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Lithium battery system | ||
Battery capacity | 150AH | |
Nominal voltage | 768V | |
Rated energy | 115.2kWh | |
Battery voltage range | 672V~876V | Single cell2.8~3.65 |
Maximum continuous charging current | 75A (0.5C) | |
Maximum continuous discharge current | 75A (0.5C) | |
working temperature | charge:0ºC~45ºC discharge:-20ºC~60ºC |
|
Optimum operating temperature | 15ºC~35ºC | |
Storage temperature | -40ºC~60ºC | System SOC: 20% - 40% |
work environment | height:<2500m Relative humidity:<95% (no condensation) |
|
Thermal management | Intelligent air cooling | |
insulation resistance | >500MΩ@1500VDC | |
Isolation and withstand voltage | 2500VDC/1min | |
Internal power supply mode | 24VDC | built-inDC/DC |
Static power consumption | 35W | Typical value, module fan not started |
data display | 7" TN true color LCD screen | Scale: 5:3, resolution 800 × four hundred and eighty |
Protection level | IP21 | |
Overall dimension (W * D * H) | ≤1000mm*700mm*2000mm | |
weight | ≤1150kg | |
cycle life | 4000 | 0.5C@25ºCcharge-discharge@80%DOD,EOL80% |
Battery Management (BMS) Section | ||
Voltage acquisition range | 1-5V | |
Single cell voltage acquisition accuracy | ≤10mV | |
Total voltage acquisition accuracy | ±1Vor±1% | |
Current acquisition range | 0~±500ADC | specified±400ADC |
Current acquisition accuracy | ≤1% | |
Temperature acquisition range | -20~125ºC | |
Temperature acquisition accuracy | ≤±1ºC | |
SOC estimation accuracy | ≤8% | Typical value with self correction |
SOH estimation accuracy | ≤8% | |
Charging overcurrent protection | >1C,10S; | |
Discharge overcurrent protection | >1C,10S; | |
Over temperature protection | discharge>60ºC(20S) charge>45ºC(20S) |
The default value of return difference is 15 ºC, which can be set |
Low temperature protection | discharge<-20ºC (1S) charge<0ºC (1S) |
The default value of return difference is 15 ºC, which can be set |
communication mode | CAN,RS485,Dry junction |